Installing the Memory Module

4 Replacement Procedures

4.3 Memory Module

Installing the Memory Module

Install the memory module according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode.

CAUTION: Install the optional memory after turning off the computer. If this is violated, the computer or memory can be damaged.

1.Insert the memory module into the connector at an angle of 45 degrees.

2.Press down on the memory module so that it is secured with both memory lock latches.

3.Reinstall the optional memory cover.

4.Secure the optional memory cover with the optional memory cover securing screw.

5.After the computer is turned on, check the hardware configuration in the Hardware Setup or TSETUP program to make sure that the installed memory module has been recognized by the system. If it has not been recognized yet, check the connections.

4-12

Satellite/Satellite Pro/L630/L635 Maintenance Manual

Page 144
Image 144
Toshiba L635, L630 manual Installing the Memory Module