Power and PowerUp Modes
When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods:
Battery pack | 7 days (Resume mode) |
(4400 mAh) | 30 days (Boot mode) |
| |
|
|
RTC battery | 1 month |
|
|
To maximize the life of your Battery Pack:
■At least once a month, disconnect the computer from a power source and operate it on battery power until the Battery Pack fully discharges. Before doing so, follow the steps below.
1.Turn off the computer’s power.
2.Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on go to step 4.
3.Operate the computer on battery power for five minutes. If the Battery Pack has at least five minutes of operating time, continue operating until the Battery Pack is fully discharged. If the Battery indicator flashes or there is some other warning to indicate a low battery, go to step 4.
4.Connect the AC adaptor to the computer and the power cord to a power outlet. The DC IN 15V indicator should glow in green, and the Battery should glow in orange to indicate that the Battery Pack is being charged. If the DC IN 15V indicator does not glow, power is not being supplied. Check the connections for the AC adaptor and power cord.
5.Charge the Battery Pack until the Battery indicator glows in green.
■If you have spare Battery Packs, rotate their use.
■If you will not be using the system for an extended period, more than one month, remove the Battery Pack.
■Disconnect the AC adaptor when the battery is fully charged. Overcharging makes the battery hot and shortens life.
■If you are not going to use the computer for more than eight hours, disconnect the AC adaptor.
■Store spare Battery Packs in a cool dry place out of direct sunlight.
Portégé M200 | 610 |
|
|