Troubleshooting
Refer also to Chapter 8, Optional Devices, for information on installing memory modules.
Problem | Procedure | ||
|
| ||
Beep sounds. (If | Make sure the memory module installed in the | ||
memory is in slot A, a | expansion slot is compatible with the computer. | ||
long beep (1 second) | If an incompatible module has been installed, | ||
followed by two short | follow the steps below. | ||
beeps (0.5 second | 1. | Turn off the power. | |
each). If in slot B, a | 2. | Disconnect the AC adaptor and all peripheral | |
long beep followed by | |||
| devices. | ||
four short beeps. If |
| ||
3. | Remove the battery pack. | ||
both in slot A and slot | |||
B, a long beep | 4. | Remove the memory module. | |
followed by two short | 5. | Install the memory module compatible with | |
beeps and after a | |||
| the computer. | ||
pause (1 second) a |
| ||
6. | Install the battery pack and/or connect the | ||
long beep followed by | |||
| AC adaptor. | ||
four short beeps.) |
| ||
|
| ||
| 7. | Turn on the power. | |
|
|
| |
Problem | Procedure |
|
|
The system will not | Is Windows Media™ Player open? The system |
enter | might not enter Standby/Hibernation, if Windows |
Standby/Hibernation | Media Player is either playing a selection or |
| finished playing a selection. Close Windows |
| Media Player before you select |
| Standby/Hibernation. |
| If problems persist, contact your dealer. |
|
|
Portégé M200 | 914 |
|
|