Operating Basics

Connecting

To connect the internal modem cable, follow the steps below.

The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer.

In case of a lightning storm, unplug the modem cable from the telephone jack.

Do not connect the modem to a digital telephone line. A digital line will damage the modem.

1.Plug one end of the modular cable into the modem jack.

2.Plug the other end of the modular cable into a telephone jack.

MODEM JACK

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

If you use a storage device such as a CDROM drive or HDD connected to a 16bit PC card, you might experience the following modem problems:

3.Modem speed is slow or communication is interrupted.

4.Skip may occur in sound.

Disconnecting

To disconnect the internal modem cable, follow the steps below:

1.Pinch the lever on the connector in the telephone jack and pull out the connector.

2.Disconnect the cable from the computer in the same manner.

Portégé M200

427