The Keyboard
Standby: When you press Fn + F3, the computer can enter Standby. To avoid entering Standby unexpectedly, a dialog box appears for verification. However, if you check the checkbox in the dialog box, it will not appear from the next time.
Hibernation: When you press Fn + F4, the computer can enter Hibernation. To avoid entering Hibernation unexpectedly, a dialog box appears for verification. However, if you check the checkbox in the dialog box, it will not appear from the next time.
Display selection: Press Fn + F5 to change the active display device. When you press these hot keys a dialog box appears. Only selectable devices will be displayed. Hold down Fn and press F5 again to change the device. When you release Fn and F5, the selected device will change. If you hold down the keys for three seconds the selection will return to LCD.
LCD Display Brightness: Pressing Fn + F6 decreases the LCD display brightness in decrements. When you press these hotkeys, the current setting will be displayed for two seconds by a popup icon. You can also change this setting through the Screen brightness item of the Basic Setup tab in Power Saver.
LCD Display Brightness: Pressing Fn + F7 increases the LCD display brightness in increments. When you press these hotkeys, the current setting will be displayed for two seconds by a popup icon. You can also change this setting through the Screen brightness item of the Basic Setup tab in Power Saver.
You cannot change the display brightness for about 18 seconds after the LCD turns on. To protect display quality, the brightness level is set at the maximum value.
Portégé M200 | 55 |
|
|