Toshiba Portege M200 manual 118

HW Setup

This procedure does not affect the settings.

Use hot keys.

1.Hold down F12 and boot the computer.

2.The following menu will be displayed with the following icons: Built
in HDD, CD
ROM, FDD (or SD memory Card), Network (LAN), PCA (ATA) card boot.

A bar will appear only under the selected device.

3.Use the left/right cursor keys to highlight the boot device you want and press Enter.

If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.

The selection method above does not change the boot priority settings in HW Setup.

If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

Portégé M200 7
4