HW Setup
HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot from the HDD.
The computer will look for the Builtin HDD first, | |
2nd HDD | next the 2nd HDD and then the PC Card. |
Card (Default) | (Default) |
|
|
2nd HDD | The computer will look for the 2nd HDD first, |
in HDD | next the Builtin HDD and then the PC Card. |
|
|
The computer will look for the Builtin HDD first, | |
PC Card | next PC Card and then the 2nd HDD. |
HDD |
|
|
|
2nd HDD | The computer will look for the 2nd HDD first, |
Card | next the PC Card and then the Builtin HDD. |
HDD |
|
|
|
PC Card | The computer will look for the PC Card first, next |
in HDD | the Builtin HDD and then the 2nd HDD. |
|
|
PC Card | The computer will look for the PC Card first, next |
HDD | the 2nd HDD and then the Builtin HDD. |
HDD |
|
|
|
If a boot command is not found on the first detected HDD, the system will not boot from the other HDD. It will search the next device in the boot priority for a boot command.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE] | Sets PXE as the protocol. (Default) |
|
|
[RPL] | Sets RPL as the protocol. |
|
|
PC card HDD boot is supported only by the PC card slot on the computer. Support is guaranteed only for TOSHIBA PC card HDDs.
When you assign a PC card HDD top priority, “PC” is not displayed. However, the PC card HDD takes the position of HDD in the Boot Priority Options list above.
Portégé M200 | 75 |
|
|