HW Setup and Passwords
If they do not match, the following message appears. You must repeat step 1.
Incorrect Password!!!
If you enter the password incorrectly three times in a row, the computer will shut down.
You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on in order to retry the procedure.
4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.
Display
This tab allows you to customize your computer’s display settings for either the internal LCD screen or for an external monitor.
Power On Display
Allows you to set the display to be used when the computer is booted up.
| If any external display is connected, the power on |
| display will be in "external display only" mode. |
| Otherwise it will be in "LCD only" mode. |
|
|
System LCD only | Irrespective of external display connection, the |
| power on display will be in integrated "LCD only" |
| mode (Default). |
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. You can change the boot priority from the device list.
Button Setting
Function Button
This feature allows you to set conditions for the Power Button and/or the other buttons.
Enabled | Enables the function button |
|
|
Disabled | Disables the function button |
|
|
User’s Manual |
