Operating Basics
BD-RE:
Panasonic CO., LTD.
BD-RE(DL):
Panasonic CO., LTD.
■DVD Super Multi drive cannot use discs that allow writing faster than 16x speed (DVD-R and DVD+R media), 8x speed (DVD-R (Dual Layer), DVD+RW and DVD+R (Double Layer) media), 6x speed (DVD- RW media), 5x speed (DVD-RAM media).
■Some types and formats of DVD-R (Dual Layer) and DVD+R (Double Layer) discs may be unreadable.
■2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.
■DISC created in DVD-R (Dual Layer) format4 (Layer Jump Recording) cannot be read.
■If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors may be noted - ensure that you check all discs for dirt or damage before you use them.
■The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD- RAM media will be affected by the quality of the disc itself and the way in which it is used.
■There are two types of DVD-R media available, authoring discs and general use discs. Do not attempt to use authoring discs as only general use discs can be written to by a computer drive.
■You can use both DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge.
■You may find that other computer DVD-ROM drives or other DVD players may not be able to read DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW discs.
■Data written to a CD-R, DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R (Double Layer) discs cannot be deleted either in whole or in part.
■Data deleted/erased from a CD-RW, DVD-RW, DVD+RW or DVD-RAM disc cannot be recovered. You must check the content of the disc carefully before you delete it, making sure that if multiple drives that can write data to discs are connected, you do not delete data from the wrong one.
■In writing to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, some space is required for file management, so you may not be able to write to the full capacity of the disc.
■Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is less than about 1GB. Therefore, in these circumstance, even if you write only a small amount of data, it might take additional time to fill in the dummy data.
