Operating Basics
Important information for use
Note the following limitations when you write Video DVD:
1.Editing digital video:
■Log in with Administrator rights to use DVD MovieFactory.
■Make sure that your computer is running on AC power when using DVD MovieFactory.
■Operate the computer at Full Power. Do not use
■While you are editing DVD, you can display preview. However, if another application is running. The preview might not display properly.
■DVD MovieFactory cannot edit or play
■Do not enter Sleep or Hibernation Mode while using DVD MovieFactory.
■Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.
■When recording to a
■CD recorder, JPEG functions,
■While recording video to DVD, please close all other programs.
■Do not run software like a screen saver because it can put a heavy load on the CPU.
■There is no support for mp3 decode and encode.
2.Before recording the video to DVD:
■When you record DVD disc, please use only discs recommended by the Drive manufacturer.
■Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD.
■Do not perform any of the following actions:
■Operate the computer for any other function, including using a mouse or Touch Pad, or closing/opening the display panel.
■Bump or cause vibration to the computer.
■Use the Mode control button and Audio/Video control button to reproduce music or voice.
■Open the DVD drive.
■Install, remove or connect external devices, including the following: SD/SDHC memory card, USB device, external display, and optical digital devices.
■Please verify your disc after recording important data.
■
■There is no support to output VCD and SVCD formats.
User’s Manual |