■Display
On screen display can be switched on or off when you press any buttons.
Off: On screen displays do not appear when you press any buttons.
On: On screen displays appear when you press any buttons (factory setting).
■Picture Mode
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.
Auto: Select this selection normally.
The DVD player automatically detects source content, film or video of playback source, and converts that signal in
the progressive output format in an appropriate method.
Film: The DVD player converts film content pictures in the progressive output format appropriately. Suitable for playback of film content pictures. The progressive output feature will be most effective under this selection.
Video: The DVD player filters video signal, and converts it in the progressive output format appropriately.
Suitable for playback of video content pictures.
Note:
Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”.
■JPEG Interval
You can continuously playback all JPEG files automatically.
After the selection below, the disc will start playback on JPEG files which have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at 10 second intervals.
15 Seconds:
Plays back images in the form of a slide show at 15 second intervals.
■Screen Saver
The screen saver operates when you leave the unit in DVD stop mode for approx. five minutes.
The DVD VIDEO logo moves randomly on the screen.
Off:
Screen Saver function is invalidated.
On:
Screen Saver function is made effective.
Function setup (DVD)
2K10101A.indb 51
51
12/22/2006 5:12:14 PM
