Toshiba SD-V295KU Set the new password, If you forget the password, Output, Interlace, DivXR VOD

■Set the new password

1)Press ▲ or ▼ to select “Password”, then press ENTER. “Enter Current Password” screen will appear.

2)Press Number buttons (0–9)to input the current password (If the password has not been set yet after you purchase this unit, it is “0000”).

3)Then press ENTER. “Enter New Password” screen will appear. Press Number buttons (0–9)to input the new password.

4)Press ENTER. Now your new password has been set. Be sure to remember this number!

If you forget the password.

1)Press OPEN/CLOSE to open the disc tray.

2)Remove the disc.

3)Press OPEN/CLOSE again to close the disc tray. “No Disc” appears on the screen.

4)While holding 7 down on the remote control and at the same time press STOP on the front panel. “Password Clear” appears on the screen. Now the password has been returned to the initial value (“0000”).

■Output

You can select the video output signal of the DVD video player to the TV from “Interlace” or “Progressive”.

Interlace:

Select when connecting to a composite TV or a TV equipped with component video inputs but progressive scan is not compatible.

Progressive:

Select when connecting to a TV equipped with component video inputs and progressive scan compatible.

Warning:

Once “Progressive” is selected when connecting to a TV progressive scan incompatible, no image will be seen on the video display.

In this case, you must reset the unit by pressing STOP, on the front panel for five seconds. The video output will be restored to “Interlace” setting, and a picture will once again be seen on a conventional analog display.

Notes:

• Some discs may not be played back with the progressive scanning mode correctly because of the disc characteristics or recording condition.

• Once Progressive scan on, S-video output is disabled.

2K10101A.indb 53

■DivX(R) VOD

In order to play DivX® VOD (Video On Demand) content on this unit, you first need to register the unit with your DivX® VOD content provider.You do this by generating a DivX® VOD registration code, which you submit to your provider.

Press ▲ or ▼ to select “DivX(R) VOD”. Then press ENTER.Your 8-character registration code is displayed. Make a note of the code as you will need it when you register with a DivX® VOD provider. Then press ENTER.

Note:	Function setup (DVD)
	~ 53 ) has completed, the unit
If each setup (pages 50

can always work under the same condition (especially with DVD discs).

Each setup will be retained in the memory even if you turn the power off.

53

12/22/2006 5:12:14 PM