Function setup (DVD)
Customizing the function settings (Continued)
Setting details
NightEMenuParental.B.L.Mode | : OffEnglish | |
QSoundTVSubtitleScr Seten Password:Off4:3Engl | ish | |
AudioDigitalutO splayOut | : PCMOEInterlaceglish | |
Picture ModeDivX(R) VOD:Auto | ||
JPEG Interval | : 5 Seconds | |
Screen Saver | : On | |
ParentalEMenuDRC.B.L. | : OffEnglish | |
PasswordTVSubtitleQSoundScr en | : Cha4:3EOngl | ngishe |
OutputDisA diolay | : OInterlaceE glish | |
DivX(R)P cture ModeVOD | : DisplayAuto | |
JPEG Interval | : 5 Seconds | |
Screen Saver | : On | |
■Night Mode
Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
Off: It plays back at the recording level on the disc.
On: Loud sound such as explosion is toned down slightly when played back. This is suitable when it is connected to a stereo.
Notes:
• This function works only when the disc recorded with Dolby Digital is played back.
• The level of Night Mode may differ depending on DVD video disc.
■QSound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Notes:
• The QSound setting can also be changed with AUDIO on the remote control 40 .
• This function works only when the disc recorded with Dolby Digital is played back.
• When this function works, the volume might changed.
• When the voice is distorted, turn off QSound.
■Digital Out
You can select the digital output sound format corresponding to your system connection.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo amplifier.
Bitstream:
Disc audio bitstream data will be output.
Off:
There is no sound output from DIGITAL AUDIO OUT jack.
Note:
Even if you select “Bitstream”, MPEG Audio will be output in PCM format.
■Parental control setting
Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit.
1)Press ▲ or ▼ to select “Parental”, then press ENTER. “Enter Password” screen will appear.
2)Press “0000” using Number buttons
•Level Off: The parental control setting does not function.
•Level 8: Virtually all DVD software can be played back.
•Level 1: DVD software for adults cannot be played back.
3)Press ▲ or ▼ to select from the level 1 to level 8. Then press ENTER. The limitation will be more severe as the level number is lower.
4)Press OPEN/CLOSE to activate Parental control setting.
Notes: |
|
• The parental control level is equivalent to the following | |
USA movie ratings. |
|
Level 1: G | Level 5: |
Level 2: | Level 6: R |
Level 3: PG | Level 7: |
Level 4: | Level 8: |
The parental control levels for other countries/area than U.S. are included for future use. Check the appropriate parental control level when you buy a DVD video disc equipped with the parental control feature in the future.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.
• The password is required every time when you change the parental level.
• If you input a wrong number, press CLEAR.
52
2K10101A.indb 52
12/22/2006 5:12:14 PM
