VCR DVD
CLOCK/COUNTER
STOP
INDEX +/–
Clock/counter display | Video index search system |
Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window.
COUNTER
This function enables you to locate the beginning of any recording made on the VCR.
Recording an INDEX mark
The Index Search functionLINE1 automatically records an
INDEX mark on the tape whenever a recording is
initiated.INDEX
Playback
CLOCK
Press VCR DVD selector. The DVD mode and the VCR mode alternate with each other in the display.
Index search
Press INDEX + or – during stop or play mode. For Succeeding programs: Press INDEX +. For Preceding programs: Press INDEX
(As many as 9 index points can be accessed via this method.)
(VCR)
DVD mode
VCR mode
When the INDEX + or
– is pressed, the unit starts searching the selected INDEX NO. and finds the portion. Then playback starts automatically. To stop the Index Search, press STOP.
or is displayed INDEX NO. (up to 9)
Notes:
• If you rewind the tape beyond “00:00”, a minus sign
• When you load a tape, the counter will reset to “00:00”.
• The counter does not function on
Notes:
• When you record an INDEX mark at the very beginning of the tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a slightly different location.
• INDEX may not function properly with old or worn out video tapes.
• INDEX marks may not be found if it is extremely close to the point where the search began.
• During recording, if you stop recording temporarily, the INDEX mark is not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
However, the picture will not have the high resolution of
Note: You cannot record
2K10101A.indb 25
25
12/22/2006 5:07:33 PM