Recording (VCR)
Timer recording
Timer recording can be programmed
VCR DVD EJECT VCR MENU SET +/–
ENTER
CANCEL
TIMER REC
To enter other programs, repeat step 2 through 4.
5 |
| • To return to the normal screen, press | ||||
| VCR MENU twice. |
|
|
|
| |
|
| DATE | START | END | LINE | SLP |
|
| |||||
|
| 26(SA) | 11:00PM 11:30PM L1 | |||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
|
| – – – – – – | – – | – | ||
DATE | START | END | LINE | – |
– – – – – – | – – | |||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – |
Press SET + or – to select the date, then press
ENTER.
DATE | START | END | LINE | – |
26(SU) | – – | |||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – |
Set the start time, end time, line “L1” and tape speed as in step 3.
DATE | START | END | LINE | SLP |
26(SU) | 11:00PM 11:30PM L1 | |||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
– – – – – – | – – | – | ||
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source on the front panel set the line to “L2”.
28
6 Press TIMER REC. The timer symbol (
) will appear on the display and the VCR standbys for recording.
At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode.
If you do not use the DVD, turn the power off.
Notes:
• The timer recording will start at 5 seconds before the preset starting time.
• If the timer symbol (
) does not appear on the display when TIMER REC is pressed, the cassette is not inserted
21.
•If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 21 .
Notes:
• If the timer symbol (
) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC, then press VCR DVD selector to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode.
• If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.
• After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock 20 and reprogram any timer recording.
2K10101A.indb 28
12/22/2006 5:07:34 PM
