7. CONTROL LOCK
The control lock has seven marked positions.
There are two control keys which will operate these locks.
l
l
Manager | Key | TSE | |
This key (MA) will access the |
| ||
PROGCMT, REG, OFF, | M. |
| |
DOWN, | and REWRAP |
|
|
positions. |
|
|
|
SE Key
This key (SE) will access all seven positions.
Each of the following
Position
PROG. CMT.
positions on the control lock serves a different function.
Function
This position is used to set the data of the PLU, store address, printing position, date, time, bar code format, etc. It is also used to transfer the PLU file using a CMT loader.
REG.
OFF
M.DOWN REWRAP X (Read)
Z (Reset)
This position is the normal control lock position which allow the issuance of printed labels.
This position is used to lock the scale power.
This position is used to designate an item for discount pricing.
This position is used to designate an item for rewrapping products.
This position is used to read all the accumulated sales totals stored in the total memory.
This position is used to reset all item file totals.
- 14 -
