Level Adjustment, Cleaning Print Head | Toshiba SL-5900, EMl-31015D

EMl-31015D

8. LEVEL ADJUSTMENT

Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle.

@eve1Gauge@

CorrectIncorrect

When the air bubble moves toward the left side, turn the right adjustable legs clockwise.

When the air bubble moves toward rear, turn the front adjustable legs clockwise.

9.	CLEANING			THE	PRINT	HEAD
If the	print	head	is dirty,	clear printing	will not be produced.		It is recommended to clean the head
with	thermal	head	cleaner	everyday before starting		operation	using the following procedure:

1.Remove the printer cover and label cassette. Then push the head-up lever in the direction indicated by the allow.

the figure to the right with the thermal head cleaner.

Then set the label cassette, and push down the print head.

NOTE: Be careful not to damage the print head when cleaning.

hermal Head Cleaner

- 15 -

Image 18

Toshiba SL-5900, EMl-31015D, EM1-31015 manual Level Adjustment, Cleaning Print Head

Contents

TEC Contents Before YOU Call for Service ProceduresError Total Safety Summary Introduction WA!VJlNG Page Precaution Specifications Option Kit and Device System Configuration FUN SystemPluplu NET PREPA= Inline Error OverviewRemote Display KEY Layout Operation KeyboardProgramming Keyboard EMl-31015D KEY Functions For Operation KeyboardWeigh By Count Report Paper Clerk For Programming Keyboards Lamp Functions NET PrepackAccm Items PROGCMT, REG, OFF Down Control LockTSE PROG. CMT Level Adjustment Cleaning Print Head IO. Removal and Replacement of Label Roll Report Paper Threading Before Starting Operation Operating Procedures Weighed Commodity Registration Bonesteak Vannessave 001.50 $4.50 FIX Price Registration PLU# By Count Registration standard function Donuts Split Price By Count Registration optional function by initial setting Blueberrypie Largeshrimps Tare Function Procedures Beefliver Preset tare subtraction Save KEY Operation Sample Void KEY OPERATlON Sample Date Change Calling and Printing a Grade Line Entry by Clerk ADD Entry by Clerk Multiple Weight Total Operation Procedures Hourly Total ReportHourlyreport bEIN Grandtotal Grand Total Report PLU Total Report 5OFGfWIDOIUYISI42.3 LREm III Deci Plutotal Clerk Total Report for SL-5900-36 only TloRt!aREAO Clerkname Wimir List UP of PLU Data Block Sample Reports Miiim Pluprogrameddata Programming Procedures Selection of Programming Menu 0TEST Changing Unit Price or PriceEnter Prog Menu No Setting or Changing PLU Data Auto CodeUPC# Ienter ENTERl Changing PLU Number Prog Change PLU Deleting PLU Data Menu No Setting Store Address or Commercial Message Adjusting Print Position for Label ‘li m Il a ‘!Y Fj Setting Date, Time, Machine Number, and Store Number LiEI Em+ Menu No CMT Operations Error Code during CMT Operations BCC Changing Bar Code Format Next Bplu PC/D Flag PLU# UPC# PC/D DEPT# PLU# UPC# Menu No Assigning Speed Keys ENTERP8 11PROG.P8 Setting Ingredient 1234 Initial Set Q-q-2 Issuing Confirmation Label for SL-5900-35136 only Menu No Switching On-Line/Local for SL-5900-35/36 only Transmission Delay Time TableP13OF QENTERP17 Setting Grade Line for SL-5900-36 onlyPI7 ENTERP17 PI8 Clear EMl-31015D Error Information Format ErrorData Error DIFF. # of Data Transmitting PLU File or Unit Price FUN System Setting Clerk Name for SL-5900-36 only Error Code Code during Transmitting Setting Print Item #I ON/OFF Setting Print Item #2 ON/OFF Overrun Error Message TableLabel END PRT Failure Memory Full Label Overrun BAD Tape or CMT Before YOU Call for ServiceCMT/FUN CMT