Toshiba EM1-31015, SL-5900, EMl-31015D manual Initial Set

EMl-31015D

NOTES: 1. ingredient data cannot be saved into CMT, PL-3 and RAM card for the TEC SL66.

2.This setting function can be used only after designating the PLU# by initial set g-6, 7 and 8, and selecting RAM capacity by initial set 14-4 and 5 fo secure a memory space. Data may be damaged if the initial set is changed during ingredient setting.

Initial Set 9 Initial Set 14

3.When no data is programmed for the PLU, ingredient cannot be set.

4.“PLU NOT FOUND” error occurs when PLU# not registered is entered.

5.The ingredient to be used for SEND or RECEIVE is cleared when entering this mode.

6.“MEMORY FULL” error occurs when there is no memory space to register ingredient data.

7.Plural PLUS cannot use same ingredient data. (PLU and ingredient data are in pairs.)

8.Any terminal in FUN System can transfer PLU and its ingredient data in pairs to other terminals.

- 62 -