11. PROGRAMMING PROCEDURES
11.3 INGREDIENT MESSAGE
11.3 INGREDIENT MESSAGE
Normal Mode |
| ESB Limited Spec. Mode |
Menu Group: 1 | Item No.: 11 | |
Item No.: | 2 |
|
|
|
|
Ingredient messages can be printed on a label with a maximum of 54 characters per line in small letters or 32 characters per line in boldfaced small letters, by up to 38 lines.
C
<MENU>
Group 1
2 |
Enter the PLU#
(max. 6 dig.)
NEXT | or |
PLU |
|
ENTER |
Enter the ingredient message (Refer to Page
Pressing the RECEIVE key calls data stored by pressing the SEND key.
Pressing the SEND key temporarily stores data into the work buffer.
C
ENTER |
TEST |
Sorting
Y |
Any key
except Y Not Sorting
The memory file is sorted when a memory full error occurs.
PROG. |
ESC. |
<MENU>
Group 1
Main
<MENU>
NOTES: 1. When no data is programmed for the PLU, ingredient cannot be set.
2.When a selected PLU is not stored in the PLU file, a “PLU NOT FOUND” error occurs.
3.Once you exit this menu and enter again, data stored in the work buffer is cleared.
4.When there is no area to store ingredient data, a “MEMORY FULL” error occurs.
5.PLUs cannot share ingredient data. (PLU and ingredient data are in pairs.)
