Cleaning the Print Head | Toshiba SL-9000-ESB SERIES, EM1-31074EE

17. CLEANING THE PRINT HEAD

17. CLEANING THE PRINT HEAD

17. CLEANING THE PRINT HEAD

WARNING!

Since there is a cutter at the paper outlet, be careful not to injure your fingers when cleaning the print head and cutter.

If the print head is dirty, printing will not be clear. The print head should be cleaned with a print head cleaner everyday before use, according to the following procedure:

1.Open the label cover and remove the label cassette. (See page 9-1)

2.Clean the print head element with the print head cleaner.

Print Head

Print Head Cleaner

Element

3.Clean the print head element with the print head cleaner.

NOTE: Be careful not to damage the print head when cleaning.

4.If any label paste is found on the label on the cutter, wipe off paste with alcohol.

After removing the label cutter, reattach it using the following procedure.

1.Install an unloaded label cassette on the scale.

2.Install the label cutter, aligning the cutter notches with the screw holes.

3.Secure the cutter with the screw (FL-3x6) so the bottom of the cutter is 0.5~0.8 mm above the peel- off plate.

Head Holder

Screw (FL-3x6)	Screw (FL-3x6)

Clearance 0.5~0.8 mm

Label Cutter

Peel-off Plate

Label Cutter

NOTE: If the cutter is scratching labels during printing, increase the clearance between the cutter and peel-off plate.

17-1

Image 90

Toshiba SL-9000-ESB SERIES, EM1-31074EE Cleaning the Print Head, Clearance 0.5~0.8 mm Label Cutter Peel-off Plate

Contents

SL-9000-ESB Series Page Safety Summary Meanings of Each Symbol Precautions Page Page Table of Contents Calling Menu by Entering Password Password SecuritySetting Password and Protect Menu Operating Procedures Introduction Accessories Applicable Model9 0 0 0 3 0 M E S B U S Option SpecificationScale Cassette Main Power Switch Drawer I/F AppearanceCMT/PL-3 I/F Display US TypeCA Type QR Type Programming Keyboard Function KEY LayoutProgramming Keyboard Name of Key Function Displays the preceding PLU data Inserts a space when entering charactersSets a block PLU # using the confirmation label procedure Used to set an auto code Primary function Secondary function Operation Keyboard and Speed KEY BoardOperation Keyboard Function Enters numeric data such as PLU #, unit price and tare Displays the date Sets the quantity of commodity in by Count modePrints the customer label Selects the item for change Print/OFF Issue. Optional key by initial setting Issues a test labelAdjusts the zero point Calls the PLU frequently used Procedure Before Operation Nutrition SettingSpeed KEY SET Installation Procedure Remote Display Installation Procedure Level Adjustment Removal and Replacement of Media Removal and Replacement of Media Outline of Operation Menu selection Programming Procedures How to access the Programming MenuHow to Select Menu and Item No ESB Limited Specification Enter the Password Title and Contents of Programming Menu How to enter characters TEC Store2nd line TEL Group Unit Price ChangeMenu Main PLU Data Setting Menu Quantity Preset TareT1.000 PLU# Open PLU Data PLU# DEPT#Open PLU Ingredient Message Group Main Nutrition Facts Additional Information Area 2~6 ~99999 or 0.0~999.9 Daily Value Max digits Contents of daily value Set the Daily Value Table Memory file is sorted when a memory full error occurs Deleting Nutrition DataMemory file sort PLU Verifying Label Group Address Setting Special Information Grade Line Department Number Speed KEY SettingSetting Department/Vendor Number Vendor Number Print Format By pressing Key Label Format Number Table 22/38 POS DATE/TIME Setting Normal Mode ESB Limited Spec. Mode Menu Group Item No Save Error code during PL-3 operationPL-3 Operation Key of the PL-3, then check whether the Save LED is on Transmission Item List Operable InoperableClear Transmission Delay Time Table ON-LINE/LOCAL BAR Code Format ExampleUPC # Flag PLU # UPC# PC/D Price Weight C C C CUPC# PC/D Title No Format Additional 221 Enter the title # See NoteEnter the title. See Note Additional 231 232 Error message during data transmission Time OUT ErrorTransferring Logo Data Idiom Setting Vendor SettingDeleting a vendor number Free Format Key functionsEnter 11-31 C D B a Available format and print items for free format For PRT Password Security Setting Password and Protect Menu 13-2 Calling Menu by Entering Password REG Operating Procedures How to access the REG., M.DOWN, or Rewrap menu Weighing Operation Sample label FIX Price Operation for US Type only By Count Operation Sample label for US type Sample label for CA and QR type 14-5 Print Count Operation Example B When operating in Fix or By Count mode From the platter Labels are being issued PLU Pre=1 Issuing Labels with NET Weight Statement for US Type only For 14-10 TARE/SAVE Function Procedures Remove the commodity Together with the container Weight Unit Price Calling and Printing Grade Lines Calling and Printing Logos Or C Selecting Print Item and Adjusting the LCD Brightness Menu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Date Change FeedPRT Batch Print Mode with 30 Items Run Assignment Changing a Unit Price and Calling G.Line/LOGO Stopping or Canceling Label Issue Preset CountVoid Floating Vendor Subtotal Receipt will be issuedPrice deletion Enter vendor # READ5 RESET6 How to access the Read or Reset menuReset Total Operation Hourly Total Report Grand Total ReportPLU Total Report Block Total Ex. UPC Block Total UPC #100100~100199 Vendor Total ReportIndividual Total Ex. Individual PLU Total PLU #100 Zone Total Ex. PLU Zone Total PLU #100~107 Error Message Table Programming ModeMessage Cause Solution Label Issue Mode Read and Reset Mode Mitting Data CMT Operation ModeMismatch Spec BAD Tape or CMT Cleaning the Print Head Clearance 0.5~0.8 mm Label Cutter Peel-off Plate Problems Solution TroubleshootingBefore You Call for Service SuppliedPage