Toshiba EM1-31064, SL-9000N-FFB Option Name, Model No, Description, Source, or Part No

2. SPECIFICATION

EM1-31064

2.2 OPTION

2.2 OPTION

Option Name		Model No.			Description			Source
		or Part No.
	LON Connector	Part No.	A modular connector used to connect scales					See
	TM8P-88P	EAJ-0028001	to each other in a LON configuration.					Note 2
	LON Terminal	Part No.	A modular resistor attached to the scales					See
	Resistor 285D-8P	EAJ-0029001	connected	at	both	ends of	the LON	Note 2
LON			configuration.
	LON Cable	Part No.	An 8-pin telephone cable used with the LON
	S-STLAN-2P	10319100003	connectors attached to both ends of the					See
	(200 m/roll)		cable. This cable connects scales to each					Note 2
			other in a LON configuration.
	External Connector	OP-9000-IOEC-B	A junction box to which the TMCC kit is					See
	Box		attached.	It is	also	used with	the RS-232
			CL/CS kit.					Note 1
	I/O PC Board	OP-9000-IOB	An I/O board equipped with the TMCC
TMCC			interface and PC-AT keyboard interface ports.					See
			It is used to construct a TMCC system and					Note 1
			program PLU data, etc.
	TMCC Cable Kit	OP-9000-IOCN-	A cable kit for the TMCC interface					See
		TMCC						Note 1
		OP-9000-	This board is used to expand the PLU
MEMO PC Board		PIGGYBACK	memory to 4MB by installing the memory					See
(SL-9000 only)		OP-9000-	module.					Note 1
		PIGGYBACK-S/F
		OP-9000-RAM-	DIP type PS-RAM to be installed on the
		512KB	MEMO PC board (OP-9000-PIGGYBACK) for
			memory expansion.
			When expanding the memory, install the two					See
Memory Module			modules as one set.					Note 1
		OP-9000-SRAM-	DIP type S-RAM to be installed on the MEMO
								and 3
			PC board	(OP-9000-PIGGYBACK-S/F) for
		512KB
			memory expansion.
			When expanding the memory, install the two
			modules as one set.
Label Cassette		OP-9000-	It is covenient to change several kinds of					See
		CASSETTE	labels.					Note 1
10 Base T (LAN)		OP-9000N-LAN	This board enables the SL-9000N to be used					See
Interface Board			in a LAN network.					Note 1
(SL-9000N only)

NOTES: 1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.

2.Order from TOSHIBA TEC Parts Center or purchase locally.

3.When purchasing memory modules locally, select one having the following specifica- tions.

■Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB) HITACHI Static RAM (OP-9000-SRAM-512KB)

■Type: HM658512ALP-8V80ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000- RAM-512KB)

HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000- SRAM-512KB)

4.The Memo PC board (Flash ROM type) is installed in the SL-9000N model as standard.

2-2