Toshiba EM1-31064JE, SL-9000N-FFB, SL-9000-FFB owner manual Lon System

11. PROGRAMMING PROCEDURES

EM1-31064

11.15 LON SYSTEM

11.15 LON SYSTEM

Menu Page:	2
Item No.:	4

The SL-9000 scales which consist of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.

ID# 1 is reserved for the master terminal.

ID# 2 is reserved for the backup master terminal or satellite terminal.

ID# 3 to 32 are for satellite terminals.

Setting numbers other than the above results in an error.

		m
<MENU>	4	CHANGE
Page 2		PLU

ID #

ENTER

IN-LINE OFF-LINE

ID#: 1

Set the number of

scales in the system.

ENTER

DLL? Yes n

No

p

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

m

NOTES: 1. Before starting the above procedure, press the key and enter IN-LINE mode.

2.When installing the backup master terminal, set the master scale’s initial status of #9-1 to 1.

3.Set ID # to all scales in a LON system.

4.When the display power is turned on, the satellite terminal is ready to receive data from the master terminal.

5.After setting the ID #, turn the power switch OFF and ON again.

11-24