11. PROGRAMMING PROCEDURES
11.12 DATE/TIME SETTING
11.12 DATE/TIME SETTING
Menu Page: | 2 |
Item No.: | 1 |
Date, time, machine number, and store code are set in this procedure.
<MENU>
Page 2
k
1 |
Set the date. | ENTER | |
(Month, Day, Year) | ||
|
Set the time.
(Hour, Minute)
ENTER |
Set the machine No.
(max. 6 dig.)
ENTER |
Set the store No.
(max. 5 dig.)
ENTER |
k
PROG. |
ESC. |
<MENU>
Page 2
Main
<MENU>
NOTES:
1.Express the time in a
2.The
error mode. Then the correct date (time) should be
3.Even when the initial Setting #
4.The date display method can be changed by the initial setting.
11.13 CMT/PL-3
Menu Page: | 2 |
Item No.: | 2 |
CMT OPERATIONS
The
In turn, information from the tape can also be transferred to another
<MENU>
Page 2
NOTES:
2 |
Set the transmission items.
(Refer to table 4)
NEXT | or |
PLU |
|
ENTER |
PROG. |
ESC. |
<MENU>
Page 2
Main
<MENU>
1.The error mode can be released by pressing the CLEAR key, and you operate can again through the above steps.
2.Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording.
3.For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.