Manuals / Toshiba / Personal Care / Scale

Toshiba SL-9000-FFB, SL-9000N-FFB, EM1-31064JE In-Line/Local, Transmission Delay Time Table

Models: SL-9000-FFB

1 96

Download 96 pages 56.8 Kb

Page 49

11.14 IN-LINE/LOCAL

11. PROGRAMMING PROCEDURES

EM1-31064

11.14 IN-LINE/LOCAL

11.14 IN-LINE/LOCAL

Menu Page:	2
Item No.:	3

When the SL-9000 is used as a satellite in an in-line system, the “ID #” and “Transmission delay time” can be set by the following procedure.

<MENU>

Page 2

3

TMCC Set ID numbers (Range: 0~255)

Select mode

lOFF-line

ENTER

The transmission delay time can be set when in-line system is selected for TMCC.

(Refer to Table 5)

ENTER

l

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

NOTES: 1. The TMCC baud rate is fixed to 4800 BPS.

2.After setting the ID #, turn the power switch OFF and ON again.

3.This setting is not available in case that the Initial setting #13-6 is set to 1 (LAN: allowed).

Table 5: Transmission Delay Time Table

	TR-Time (ms)		TR-Time (ms)

1	20~39	6	120~139
2	40~59	7	140~159
3	60~79	8	160~179
4	80~99	9	180~199
5	100~119

The default is 3.

11-23

Image 49

Toshiba SL-9000-FFB, SL-9000N-FFB, EM1-31064JE owner manual In-Line/Local, Transmission Delay Time Table

Contents

SL-9000/9000N-FFB SERIES Table of ContentsOwner’s Manual TEC Electronic Computing ScalePage Meanings of Each Symbol Safety SummarySafety Summary Precautions Safety SummaryRequest Regarding Maintenance Page TABLE OF CONTENTS2. The contents of this manual may be changed without notification Page 1. INTRODUCTION 1.1 APPLICABLE MODEL 1.2 ACCESSORIESS L - 9 0 0 0 - 3 0 M - N - F F B - U S 2.1 SCALE 2. SPECIFICATION2. SPECIFICATION Option Name 2.2 OPTIONModel No Description3. APPEARANCE 4.1 US TYPE 4. DISPLAY4.2 CA/QR TYPE 4. DISPLAY5.1 PROGRAMMING KEYBOARD 5. KEY LAYOUTProgramming Keyboard Function Name of KeyFunction Name of KeyDisplays the preceding PLU data Operation Keyboard Function 5.2 OPERATION KEYBOARD AND SPEED KEYBOARDName of Key FunctionName of Key Operation Keyboard FunctionFunction Prints a customer labelPRINT 5.3 SELF SERVICE KEYBOARDName of Key FunctionRETURN CHANGE6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATIONRemote Display 7. INSTALLATION PROCEDURE8. LEVEL ADJUSTMENT 9. REMOVAL AND REPLACEMENT OF MEDIA NOTE Ensure that the label guide plate aligns with the dowel 10. OUTLINE OF OPERATION 10. OUTLINE OF OPERATIONRegistration Mode How to access the Programming Menu 11. PROGRAMMING PROCEDURESHow to Select Menu and Item No 11. PROGRAMMING PROCEDURES Table 1 Title and Contents of Programming MenuCOMBINATION MESSAGE BACK-UP /LOAD DATA OF PLU/ING/NUTRI./SPEED KEYHow to enter characters 11.1 UNIT PRICE CHANGE 11. PROGRAMMING PROCEDURES 11.2 PLU DATA SETTINGEM1-31064 11.2 PLU DATA SETTING PageC Compulsory, Blank Not compulsory Shelf Life Preset % Tare Price Commodity Name Mode Flag W Weigh, F Fix, B By-count Compulsory TareT1.000 Quantity11.3 INGREDIENT MESSAGE 11. PROGRAMMING PROCEDURES 11.4 NUTRITION FACTSEM1-31064 11.4 NUTRITION FACTS Vitamin A Set the Daily Value Table Memory file sort Deleting Nutrition Data11. PROGRAMMING PROCEDURES Nutrition Facts11.5 PLU VERIFYING LABEL Store Address 11.6 ADDRESS AND COMMERCIAL MESSAGE SETTINGCommercial Message# ENTER Scrolling ↔ fixMessage construction 11.7 COMBINATION MESSAGE3. Display method varios depending on message construction 11.9 GRADE LINE 11.8 SPECIAL INFORMATIONSetting Department/Vendor Number 11.10 SPEED KEY SETTINGDepartment Number Vendor Numbercorrect? 11.11 PRINT FORMATNOTE Format No Table 2 Label Format Number Table11.13 CMT/PL-3 11.12 DATE/TIME SETTINGCMT OPERATIONS PL-3 Operation Table 3 Error code for PL-3 operationNOTES 1. Press SAVE or LOAD key on the PL-3 4. Be sure to start the PL-3 before the main operation11. PROGRAMMING PROCEDURES Table4 Transmission Item Listoperable inoperable11.14 IN-LINE/LOCAL Table 5 Transmission Delay Time Table11.15 LON SYSTEM key to Data TransmissionExample 11.16 BAR CODE FORMATDefault Bar Code Format 1 Check digit C/D is at other than digit-13 NOTE Title No. and format of the additional information area 11.17 TITLESNOTE Two sizes of logos are printed differently as follows 11.18 TRANSFERRING LOGO DATAReceipt Print Table 6 Error message for data transmissionLOGO is printed on the center of printing area 11.20 VENDOR SETTING 11.19 IDIOM SETTINGDeleting a vendor number Key functions 11.21 FREE FORMAT SETTINGNOTES 1. The following print items cannot be magnified 1 LOGOs 5. The following items cannot be rotated 1 LOGO 12. PROGRAMMED DATA VERIFICATION REPORTS How to access the REPORTmenuMenu REPORT messages are listed in the PLU # order from small to All the preset commodity names are listed in the PLU13.1 SETTING PASSWORD AND PROTECT MENU 13. PASSWORD SECURITYNOTES 1. Select validity of the password by pressing the key 13. PASSWORD SECURITY 13.2 CALLING MENU BY ENTERING PASSWORDEM1-31064 13.2 CALLING MENU BY ENTERING PASSWORD How to access the REG., M.DOWN, or REWRAP menu 14. OPERATING PROCEDURESNOTES BEFORE STARTING OPERATION Menu REG., M. DOWN, or REWRAP Mode WEIGH 14.1 WEIGHING OPERATION14. OPERATING PROCEDURES Sample label14.2 FIX PRICE OPERATION FOR US TYPE ONLY Menu REG., M.DOWN, or REWRAP Mode BY-COUNT 14.3 BY COUNT OPERATION14. OPERATING PROCEDURES Sample label for US typeExample An open price item can be sold as below 14. OPERATING PROCEDURES1 1 piece at 15 dollars 2 15 pieces at 10 dollars 3 15 pieces sold at 0.5 dollars per 10 piecesEM1-31064 14.4 PRINT COUNT OPERATION 14.4 PRINT COUNT OPERATION14. OPERATING PROCEDURES Example B When operating in Fix or By Count modeThe nutrition information labels is issued in the following methods 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT FOR US TYPE ONLY 4. Weight data is shifted to the left 14.6 TARE/SAVE FUNCTION PROCEDURES PACKED ON 14.7 CALLING AND PRINTING GRADE LINESNET WT 14.8 CALLING AND PRINTING LOGOS Menu REG, M.DOWN, or REWRAP Mode WEIGH, FIX, or BY COUNT 14.9 SELECTING PRINT ITEM14. OPERATING PROCEDURES Mode WEIGH, FIX, or BY COUNT 14.10 DATE CHANGEThe date can be changed temporarily Menu REG., M.DOWN, or REWRAP Menu REG., M.DOWN, or REWRAP Mode FIX, or BY COUNT 14.11 BATCH PRINT MODE with 30 Items Run Assignment14. OPERATING PROCEDURES 14. OPERATING PROCEDURES Changing a Unit Price and Calling G.Line/LOGO14-17 Stopping or Canceling Label Issue 14.12 VISUAL COMMODITY LIBRARY 14.13 FLOATING VENDOR Subtotal Price deletion15. TOTAL OPERATION How to access the READ or RESET menu15.2 GRAND TOTAL REPORT 15.1 HOURLY TOTAL REPORT15.3 PLU TOTAL REPORT 15.4 VENDOR TOTAL REPORT Programming Mode 16. ERROR MESSAGE TABLESolution MessageRead and Reset Mode Label Issue ModeSolution SolutionLON System Mode CMT Operation ModeError message BM/S17. CLEANING THE PRINT HEAD 17. CLEANING THE PRINT HEADBefore You Call for Service 18. TROUBLESHOOTINGProblems SolutionPage PRINTED IN SINGAPORE EM1-31064J