Troubleshooting

AccuPoint II

ProblemProcedure

On-screen pointer does not respond to AccuPoint II operation

The system might be busy. If the pointer is shaped as an hourglass, waitfor it to resum its normal shape and try again to move it.

If a PS/2 or serial mouse is connected, check the HW Setup window. The Pointing Device option should be set to Simultaneous to use both the AccuPoint II and an external PS/2 mouse.

 

Double-Click does not

Try changing the double-click speed setting in

 

work

the mouse control utility.

 

 

1.

Open the Control Panel, select the Mouse

 

 

 

icon and press Enter.

 

 

2.

Click the Buttons tab.

 

 

3.

Set the double-click speed as instructed

 

 

 

and click OK.

 

 

 

 

The mouse pointer

Try changing the speed setting in the mouse

 

moves too fast or too

control utility.

 

slow

1.

Open the Control Panel, select the Mouse

 

 

 

 

 

icon and press Enter.

 

 

2.

Click the Pointer Option tab.

 

 

3.

Set the speed as instructed and click OK.

 

 

If problems persist, contact your dealer.

 

 

 

 

PS/2 mouse

 

 

 

 

 

 

Problem

Procedure

 

 

 

 

On-screen pointer

Check that the PS/2 mouse cable’s 6-pin

 

does not respond to

connector is firmly connected to the PS/2

 

PS/2 mouse operation

mouse/ keyboard port.

You may have connected the mouse after turning the computer on. Turn off the computer, make sure the mouse is firmly connected and turn the computer back on.

Is your software configured to recognize the mouse? Check the software documentation.

If problems persist, contact your dealer.

TOSHIBA TE2300

9-12