Operating Basics

■Writing with software other than Drag’n Drop CD+DVD has not been confirmed. Therefore, operation with other software cannot be guaranteed.

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.

■Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error.

■Do not perform any of the following actions:

■Operate the computer for any other function, including use of a mouse or AccuPoint II, closing/opening the LCD panel.

■Start a communication application such as a modem.

■Apply impact or vibration to the PC.

■Install, remove or connect external devices, including the following: PC card, USB devices, external display, i.LINK devices, optical digital devices.

■Use the CD/MP3 control buttons to reproduce music and voice.

■Open the optical media drive.

■If the media is poor in quality, dirty or damaged, writing or rewriting errors may occur.

■Set the computer on a level surface and avoid places subject to vibration such as airplanes trains, or cars. Do not use an unstable surface such as a stand.

■Keep mobile phones and other wireless communication devices away from the computer.

TOSHIBA TE2300

4-12