Toshiba TE2300 Data Verification, Drag’n Drop CD+DVD, Options, Data BOX, Byte compare, TOSHIBA TE2300, Operating Basics, DATA DISC Option, Record and Verify

Operating Basics

■Install, remove or connect external devices, including the following: PC card, USB devices, external display, i.LINK devices, optical digital devices.

■Use the Audio/Video control button to reproduce music or voice.

■Open the DVD Multi drive

■Do not use standby/hibernation while you write or rewrite.

■Make sure writing or rewriting is completed before going into standby/ hibernation. Writing is completed if you can open the DVD Multi drive tray.

■Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand.

■Keep mobile phones and other wireless communication devices away from the computer.

■Always copy data from the HDD to the DVD-RAM. Do not use cut- and-paste. The original data will be lost if there is a write error.

Drag’n Drop CD+DVD

Note the following limitations when you use Drag’n Drop CD+DVD:

■DVD-Video cannot be created using Drag’n Drop CD+DVD.

■DVD-Audio cannot be created using Drag’n Drop CD+DVD.

■You cannot use Drag’n Drop CD+DVD’s music CD function to record music to a DVD-R/-RW disc.

■Do not use the DISC Backup function of Drag’n Drop CD+DVD to copy DVDVideo and DVD-ROM with copyright protection, because the copy will not play correctly.

■DVD-RAM disc cannot be backed up with the DISC Backup function of Drag’n Drop CD+DVD.

■You cannot backup a CD-ROM or CD-R/-RW to DVD-R/-RW using the DISC Backup function of Drag’n Drop CD+DVD.

■You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW to CD-R/ -RW using the DISC Backup function of Drag’n Drop CD+DVD.

■Drag’n Drop CD+DVD cannot record in packet format.

■You might not be able to use the DISC backup function of Drag’n Drop CD+DVD to back up a DVD-R/-RW disc that was made with other software on a different DVD-R/-RW recorder.

Data Verification

To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD.

1.Right-click Data BOX and select Options to display the DATA DISC Option window.

2.Mark the Record and Verify check box and select Byte compare.

3.Click the OK button.

TOSHIBA TE2300 4-16