Power and Power-Up Modes

BATTERY RELEASE

BATTERY PACK

LATCH

Removing the battery pack

Installing the battery pack

To install a battery pack, follow the steps below.

The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.

1.Be sure the computer’s power is off and all cables are disconnected.

2.Insert the battery pack.

BATTERY PACK

Installing the battery pack

3.Push down the battery pack until it is firmly seated.

Starting the computer by password

If you registered a password as supervisor or user, you must enter it to start the computer. For more information about how to set a password, refer to Chapter 7, HW Setup and Passwords.

To start up the computer with the password, follow these steps:

1.Turn on the power as described in Chapter 3, Getting Started and the following message appears:

TOSHIBA TE2300

6-13