Toshiba TE2300 Fn Sticky key, Emulating Fn key on external keyboard, Fn + F6, Fn + F7, F number, The Keyboard, TOSHIBA TE2300, Wireless setting:, Display Brightness:

The Keyboard

Display Brightness: Pressing Fn + F6 decreases the display brightness in increments. When you press these hotkeys, the current setting will be displayed for two seconds by an icon. You can also change this setting through the Monitor brightness item of the Power Save Mode window in Power Saver.

Display Brightness: Pressing Fn + F7 increases the display brightness in increments. When you press these hotkeys, the current setting will be displayed for two seconds by a pop-up icon. You can also change this setting through the Monitor brightness item of the Power Save Mode window in Power Saver.

You cannot change the display brightness for about 18 seconds after the LCD turns on. To protect display quality, the brightness level is set at the maximum value.

Wireless setting: Non functioning key combination.

Emulating Fn key on external keyboard

The Fn key is only on Toshiba keyboards. If you use an external keyboard attached to the computer, you can execute Fn key combinations by emulating the Fn key. See Chapter 7, HW Setup and Passwords, for details on setting the Fn key equivalent.

Fn Sticky key

You can use the Toshiba Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and they press an “F number” key.

TOSHIBA TE2300 5-5