Toshiba TE2300 Wireless Channels Sets (Turbo Mode), Wireless IEEE 802.11 Channels Sets (Revision A)

Wireless LAN

When installing Wireless LAN cards, the channel configuration is managed as follows:

■For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

■For Wireless LAN cards installed in wireless clients operating in a peer-to-peer mode, the card will use the default channel 10.

■In a Wireless LAN Access Point, the Wireless LAN card will use the factoryset default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device.

Wireless IEEE 802.11 Channels Sets (Revision A)

Frequency Range Channel ID	5150-5850 MHz	Note
36	5180
40	5200
44	5220
48	5240
52	5260
56	5280
60	5300
64	5320
149	5745	US only *
153	5765	US only *
157	5785	US only *
161	5805	US only *

* Available Area: US (USA, CANADA) only

A peer-to-peer mode is available under the following condition:

A Wireless LAN card receives a “US county/region code” beacon of the standard IEEE 802.11 (Revision D) from a Wireless LAN Access Point.

Wireless Channels Sets (Turbo Mode)
Frequency Range Channel ID	5150-5850 MHz	Note
42	5210	US only *
50	5250	US only *
58	5290	US only *
152	5760	US only *
160	5800	US only *

* Available Area: US (USA, CANADA) only

TOSHIBA TE2300 I-3