Toshiba TE2300 HW Setup and Passwords, HW Setup, HW Setup window, Accessing HW Setup

Power and Power-Up Modes

TOSHIBA TE2300

Chapter 7

HW Setup and Passwords

This chapter explains how to use the TOSHIBA HW Setup program to configure your computer and how to set passwords.

HW Setup

TOSHIBA HW Setup lets you configure settings for pointing devices, display, CPU, boot priority, keyboard, USB, LAN, general, password, device config and parallel/printer.

If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

Accessing HW Setup

Click start, click Control Panel, click Printers and Other Hardware, and select TOSHIBA HW Setup to run HW Setup.

HW Setup window

The HW Setup window contains the following tabs: Pointing Devices, Display, CPU, Boot Priority, Keyboard, USB, LAN, General, Password, Device Config and Parallel/Printer.

There are also three buttons: OK, Cancel and Apply.

OK	Accepts your changes and closes the HW Setup
	window.
Cancel	Closes the window without accepting your
	changes.
Apply	Accepts all your changes without closing the
	HW Setup window.

User’s Manual 7-1

TOSHIBA TE2300 7-15