HW Setup and Passwords

2.Enter the currently registered password. The character string you enter is displayed as a string of asterisks.

Enter Password: ****

If you click the OK button before entering the password, Registered will appear on the display.

3.Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat step 1.

Incorrect Password!!!

If you enter the password incorrectly three times in a row, the computer needs to shut down.

You will not be able to access the password option in HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described earlier in this section to set a new user password.

Device Config

Device Configuration

This option lets you set the device configuration.

All Devices

BIOS sets all devices.

 

 

Setup by OS

Operating system sets devices that it can

 

control.

 

 

Parallel/Printer

This tab lets you set the Printer Port Type. Use the Windows Device Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.

ECP

Sets the port type to Extended Capabilities Port

 

(ECP). For most printers, the port should be set

 

to ECP. (Default)

 

 

Standard

This setting should be used with some other

Bi-directional

parallel devices.

 

 

TOSHIBA TE2300

7-3