3.30 SETUP 3 Tests and Diagnostics
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 3-97
Second HDD → Built-in HDD→USB
: The priority is set as Second HDD → Built-in HDD→USB.
Built-in HDD → USB → Second HDD
: The priority is set as Built-in HDD → USB → Second HDD.
Second HDD → USB → Built-in HDD
: The priority is set as Second HDD → USB → Built-in HDD.
USB → Built-in HDD → Second HDD
: The priority is set as USB → Built-in HDD → Second HDD.
USB → Second HDD → Built-in HDD
: The priority is set as USB → Second HDD → Built-in HDD.
NOTE: If the boot command can not be detected from the prior HDD, booting
target changes to other devices.
Some modules may not be displayed.
7. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Dynamic CPU Frequency Mode
Use this option to choose a setting from the followings. When the CPU of the
computer is Celeron-M, this option is not displayed.
Dynamically Switchable
Enables Pentium-M processor featuring Intel SpeedStep
technology. (Default)
Always High Disables Pentium-M processor featuring Intel
SpeedStep technology and always runs the processor at
its maximum speed.
Always Low Disables Pentium-M processor featuring Intel
SpeedStep technology and always runs the processor at
its default speed.