Toshiba TECRA M4 - page 286

4 Replacement Procedures 4.23 Microphone / Front panel
Installing the microphone
The following describes the procedure for installing the microphone. (See Figure 4-34.)
1. Fitting the microphone to the shapes of slot, install the microphone to the cover
assembly.
2. Install the Mic holder to the cover assembly while fitting it to the slit of cover
assembly and secure them with the following screws.
• M2.5x4.0B FLAT BIND screw x2 (x1 for each side)
4.23.2 Front panel
Removing the front panel
The following describes the procedure for removing the front panel. (See Figure 4-35.)
1. Remove the following screws and front panel from the cover assembly.
• M2.5x6.0B FLAT BIND screw x2
2. Detach the display latch from the front panel.
M2.5x6.0B FLAT BIND
Display latch
Front panel
Figure 4-35 Removing the front panel
4-56 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)