Toshiba TECRA M4 - page 315

4 Replacement Procedure 4.32 Fluorescent lamp
Assembling the cell with PCB
1. Remove the parting paper from the double-sided tape on the backlight unit.
2. Turn the backlight on.
3. Check that the backlight is free of dust, foreign objects, or damage. Perform this
check also for the reverse side of the cell. Then install the cell with PCB in the
backlight unit.
CAUTION: 1. Align the top left corner of the cell with the corresponding corner of the
backlight unit.
2. Be careful not to damage the FPC.
Remove the
parting paper on
th
e
doub
l
e
-
s
i
de
Align the top
left corner of
the backlight
unit.
Figure 4- 55 Replacing 14.1 Inch TMD fluorescent lamp (7)
4-84 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)