Toshiba TECRA M4 - page 260

4.12 MDC / Modem cable 4 Replacement Procedures
5. Remove the following screw and disconnect the drain cable 1 from the stud of
system board.
• M2.0x4.0Z BIND screw x1
or
• M2.0x4.0B LH STICK x1
6. Peel off the glass tape and open the insulators and pull out the Modem cable from
the insulators.
7. Remove the following screw and disconnect the drain cable 2 from the stud of hinge
assembly.
• M2.0x4.0Z BIND screw x1
8. Disconnect and remove the Modem cable from the connector CN3001 on the system
board.
Modem cable
CN3001 Insulator
Drain cable 2
M2.0x4.0Z
BIND
M2.0x4.0Z BIND
or
M2.0x4.0B LH STICK
Glass Tape
Drain cable 1
Figure 4-18 Removing the Modem cable
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-31