4 Replacement Procedures 4.18 Mic (L) cable guide
Installing the Mic (L) cable guide
The following describes the procedure for installing Mic (L) cable guide (See Figure 4-28).
1. Connect the HDD cable from the connector CN1900 on the system board.
Caution: When laying the HDD cable, be careful on the points shown in the following
figure.
Fix the mated portion
with a sheet of insulator.
4-46 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
Let not the cables out of the
guides.
2. Install the Mic (L) cable guide to the system board and secure it with the following
screws.
• M2.5x6.0B FLAT BIND screw x1
3. Connecting the Mic (L) cable to the connector CN6060 on the system board, arrange
the cable along the Mic (L) cable guide.