3 Tests and Diagnostics 3.30 SETUP
3-102 [CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
13. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LCD +Analog RGB Selects both the internal LCD and the external CRT for
simultaneous display.
System LCD only Selects only internal LCD display even if the external
monitor is connected.
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
saved. If data does not appear on the display you are using after starting in
Standby or Hibernation, press Fn+F5 to change the active display device.
When an external CRT display, which does not support SVGA mode is connected
and “LCD+AnalogRGB”
is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.
(c) TV type
This option allows you to select the type of TV.
NTSC (Japan) ; TV in Japanese system
NTSC (US) ; TV in the U.S. system
PAL ; TV in Europe etc. system
14. Peripheral
Use this option to select the peripheral’s mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.