3.30 SETUP 3 Tests and Diagnostics
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 3-103
(b) Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Std. Bi-Direct.
This setting should be used with some other parallel devices.
15. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled Enables LEGACY support. (Default)
USB keyboard/USB mouse are available without the driver.
Disabled Disables LEGACY support
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled Enables LEGACY support. (Default)
USB floppy disk is available without the driver.
Disabled Disables LEGACY support
(c) USB Memory BIOS Support Type
This option sets the type of the USB memory as a startup device.
HDD Sets the type of the USB memory to be equivalent to the HDD (Default).
(Based on the [HDD] order in the [Boot Priority Options] item. The
order with respected to the other HDD can be set in the [HDD Priority
Options] item.)
FDD Sets the type of the USB memory to be equivalent to the FDD.
(Based on the [HDD] order in the [Boot Priority Options] item.)
16. PCI LAN
This option sets the Enable / Disable of the built-in LAN functions.
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.