3.20 ONLY ONE TEST 3 Tests and Diagnostics
Subtest 5 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
(1) Press [Caps Lock ] key ! ...Caps (on/off)
(2) Press [Fn + F10 ] key ! ...Arrow (on/off)
(3) Press [Fn + F11 ] key ! ...Num (on/off)
(4) Slide [BT/W-LAN switch L&R]! (on/off)
Confirm corresponding LED lights properly.
Press Enter and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green
Check if the color of the message changes orange to green alternately.
Press Enter and return to the ONLY ONE TEST menu.
Subtest 6 Buuton
This subtest checks the moving of the of the front operation panel button.
Press the Toshiba Assist button after the following message appears.
Step 1 X 1 2
* * *.
Press Function button (Assist button )
OK message appears in the display if the test ends without an error.
Press any key return to each Steps if NG! or Press any key message apprears.
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 3-45