Toshiba TECRA M9 4.16 RTC battery

4 Replacement Procedures 4.16 RTC battery
4.16 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery. (See Figure 4-28.)
1. Disconnect the RTC battery cable from the connector CN9300 on the system board.
2. Peel off the glass tape and remove the RTC battery from the slot.
Glass tape
RTC battery
RTC battery cable
CN9300
Figure 4-28 Removing the RTC battery
Installing the RTC battery
The following describes the procedure for installing the RTC battery. (See Figure 4-28.)
1. Install the RTC battery to the slot and stick the glass tape in place.
2. Arrange the RTC battery cable along the guides and connect it to the connector
CN9300 on the system board.
4-42 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)