4.25 Wireless LAN antenna/Bluetooth antenna 4 Replacement Procedures
4.25 Wireless LAN antenna/Bluetooth antenna
Removing the Wireless LAN antenna/Bluetooth antenna
The following describes the procedure for removing the wireless LAN antenna/Bluetooth
antenna (See Figure 4-46.)
1. Peel off the acetate tapes securing the wireless LAN antenna cables and Bluetooth
antenna cable.
2. Remove the wireless LAN antennas and Bluetooth antenna from the slot of the
display rear cover.
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-61
Figure 4-46 Removing the wireless LAN antenna/Bluetooth antenna
Installing the Wireless LAN antenna/Bluetooth antenna
The following describes the procedure for installing the wireless LAN antenna/Bluetooth
antenna. (See Figure 4-46.)
1. Install the wireless LAN antennas and Bluetooth antenna to the display cover.
2. Arrange the wireless LAN antenna cables and Bluetooth antenna cable on the
display rear cover and secure it with the acetate tapes.
A
cetate tape
Wireless LAN antenna
Bluetooth antenna
A
cetate tape
A
cetate tape
Insulator
A
cetate tape
Wireless LAN antenna
A
cetate tape