4 Replacement Procedures 4.13 Touch pad
2. Disconnect the touch pad cable from the connector CN3240 on the system board and
remove the touch pad from the slot. (The touch pad is adhered by the double-sided
tape to the slot.)
Touch pad
CN3240
Touch pad cable
Figure 4-22 Removing the touch pad
3. Peel off the glass tape and disconnect the touch pad cable from the connector on the
touch pad.
Touch pad cable Glass tape
Double sided tape
Double sided tape
Insulator
Figure 4-23 Removing the touch pad cable
4-34 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)