Operating Basics

Loading discs

To load CD/DVDs, follow the steps as detailed below:

1.When the computer’s power is on, press the eject button to open the disc tray slightly.

2.Grasp the disc tray gently and pull until it is fully opened.

Disc tray

Eject button

Figure 4-5 Pressing the eject button and pulling the disc tray open

3. Lay the CD/DVD, label side up, in the disc tray.

Laser lens

Figure 4-6 Inserting a CD/DVD

When the disc tray is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the disc tray. After seating the CD/DVD, however, make sure it lies flat.

User’s Manual

4-16