Troubleshooting

USB floppy diskette drive

For further information, please refer to Chapter 3, Hardware, Utilities and Options.

Problem

Procedure

Drive does not operate

Check the connection between the computer and

 

the drive to ensure that it is properly attached.

 

 

Some programs runThe computer's software or hardware
correctly but others do

configuration may be causing a problem - ensure

not

that these configurations match your

 

requirements (refer to any relevant

 

documentation, for example that supplied with

 

any software in use, for further information).

 

 

You cannot access theTry another floppy diskette in the drive - if you are
external floppy disketteable to access this disk then it indicates the
drive

original disk and not the drive is probably causing

 

the problem.

 

If you are still unable to resolve the problem,

 

contact your reseller, dealer or service provider.

 

 

PC Card

For further information, please refer to Chapter 3, Hardware, Utilities and Options.

ProblemProcedure

PC Card error occurs Remove the PC Card from the computer and then reinsert it in order to ensure it is firmly connected.

In the event that the PC Card is attached to an external peripheral device, ensure that this connection is properly made.

If the problem persists, then you should refer to the documentation supplied with your PC Card for further information.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

User’s Manual

8-13