Toshiba 9.Turn your computer over, Install the battery pack (refer to the, 7.Slide the Cooling module cover back into place on the computer to reattach

TOSHIBA PC Health Monitor

5.Using a thin-tipped tool, push on the hole in the edge of the Cooling module cover and slide it in the direction of the arrow to remove.

Cooling module cover

Hole

Figure G-1 Removing the cooling module cover

6.Lift the plastic film and clean the cooling module using a vacuum cleaner or other cleaning tool.

Do not use a ball pen, cotton swap or similar to remove dust. If these touch the inside of the computer, it could be damaged or become clogged, leading to further problems.

Plastic film

Figure G-2 Lift the plastic film

7.Slide the Cooling module cover back into place on the computer to reattach.

8.Install the battery pack (refer to the Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

9.Turn your computer over.

User’s Manual G-4