Toshiba garbled, Password, Keyboard, provider, Press the, typing again, Real Time Clock, produce numbers, Some letter keys, Output to screen is, Problem, Procedure

Troubleshooting

Real Time Clock

ProblemProcedure

The following message is Displayed on the screen:

RTC battery is low or CMOS checksum is inconsistent. Press [F1] key to set Date/Time.

The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:

1.Press the F1 key - the BIOS setup application will load.2.Set the date in the System Date field.3.Set the time in the System Time field.4.Press the END key - a confirmation message will be displayed.

5.Press the Y key - the BIOS setup application will end and the computer will restart.

Password

ProblemProcedure

Cannot enter password Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and Power-Up Modes for further information.

Keyboard

Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard for further information.

Problem	Procedure
Some letter keys	Check that the numeric keypad overlay is not
produce numbers	activated - press the FN + F11 hot key and try
	typing again.
Output to screen is	Please refer to your software's documentation to
garbled	ensure that its is not remapping the keyboard in
	any way (remapping involves changing or
	reassigning the function of each key).
	If you are still unable to use the keyboard, you
	should contact your reseller, dealer or service
	provider.

User’s Manual 8-7