Toshiba ESC, END, TPM, Yes, Yes, PGDN, Start, Charge, Hide TPM, Hide TPM, All Programs, Module (TPM), Trusted Platform, TOSHIBA USB Sleep, and Charge Utility

	Hardware, Utilities and Options
TOSHIBA USB Sleep	This utility is able to either enable or disable the
and Charge Utility	USB Sleep and Charge function.
	Shows the positions of USB ports that support
	the USB Sleep and Charge function and displays
	the battery's remaining capacity.
	To start this utility, click Start -> All Programs ->
	TOSHIBA ->Utilities ->USB Sleep and
	Charge.
Trusted Platform	The TPM (Trusted Platform Module) is a security
Module (TPM)	encryption device for the hard disk drive.
	BIOS setup and Infineon TPMSoftware
	Professional Package must be configured in
	order to use TPM.
	For further information on how to set up and use
	this utility, please refer to the Infineon TPM
	Installation Guide from the
	C:\TOSAPINS\Infineon TPM Installation Guide.

To enable TPM through the BIOS setup:

1.Turn on the computer while pressing the ESC key.

2.Press the F1 key when directed.

3.Press the PGDN key.

4.Press the down arrow key until TPM is highlighted, then press the space bar to change the TPM status to Enabled.

5.Press the Y key to save the changes.

6.Press END and then press the Y key to accept the changes. The computer will restart.

In order to change the TPM setting when the Hide TPM setting is currently set to Yes, switch the Hide TPM setting from Yes to No.

User’s Manual 3-14