Hardware, Utilities and Options

Display automatic power off *1

This feature automatically cuts off power to the computer's display panel when there is no keyboard input for a specified time, with power being restored the next time a key is pressed. This can be specified in the Power Options.

HDD automatic power off *1

This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options.

System automatic Sleep/Hibernation Mode *1

This feature automatically shuts down the system into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a specified time. This can be specified in the Power Options.

Keypad overlayA ten-key numeric keypad is integrated into the

 

keyboard. Please refer to the Keypad overlay

 

section in Chapter 5, The Keyboard, for

 

information on using this feature.

 

 

Power on passwordTwo levels of password security, supervisor and

 

user, are available to prevent unauthorized

 

access to your computer.

 

 

Instant securityA specific hot key function automatically locks the

 

system providing data security.
Intelligent power supply *1

A microprocessor in the computer's intelligent power supply detects the battery's charge, automatically calculates the remaining battery capacity and protects electronic components from abnormal conditions such as a voltage overload from the AC adaptor. This can be specified in the Power Options.

Battery save mode *1 This feature lets you configure the computer in order to save battery power. This can be

specified in the Power Options.Panel power on/off This feature automatically turns power to the

*1computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in the Power Options.

Low battery automaticHibernation Mode *1

When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation Mode and shuts itself down. This can be specified in the Power Options.

User’s Manual

3-7