TP-Link TL-R470T+ manual Quick Setup, Network, 1 WAN, WAN Mode, 1.2 WAN1

4.2 Quick Setup

Please refer to the Chapter 3 Quick Installation Guide.

4.3 Network

4.3.1 WAN

4.3.1.1WAN Mode

TL-R470T+ provides four available WAN ports. You can set the number of WAN ports on this page.

Choose the menu Network→WAN→WAN Mode to load the following page.

Figure 4-2 WAN Mode

WAN Mode

WAN Ports:Select the total number of WAN ports you prefer to use. And the router will adjust the physical ports accordingly, which can be illustrated on the following port sketch.

Note:

●By default, TL-R470T+ is set to work in the mode of dual WAN ports.

●Any change to the number of WAN ports may lead to a loss of current configurations. Please be sure to backup your configurations in advance.

4.3.1.2WAN1

TL-R470T+ provides the following six Internet connection types: Static IP, Dynamic IP, PPPoE/Russian PPPoE, L2TP/Russian L2TP, PPTP/Russian PPTP and BigPond. To configure the WAN, please first select the type of Internet connection provided by your ISP (Internet Service Provider).

-18-